T4bee Bottomframe/Lipo plate
by Ghostface, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Didn't want to drill out the holes to make the screws on my T4bee frame sit flush so I designed this plate. As a bonus it acts as a cushion for the battery and anti-slip mat if printed in TPU upsidedown on glass (see print details).
There are multiple version.
- Full goes over the whole plate and includes cut-outs for the lipo strap.
- Small leaves the lipo strap cutouts free
- With and without ridges (if you print in TPU check print details).
Personally I use the small one without ridges.
The lipo strap plate on the picture can be found here: https://www.thingiverse.com/thing:2515483
Printed in TPU/Semiflex. Should also work with other materials.
If you print in TPU on glass, print it upside down to create a smooth anti-slip surface for the lipo to stick to.
Do not use the version with ridges then.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
T4bee Bottomframe/Lipo plate by Ghostface is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Ghostface a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Ghostface would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).