While I still use the Spool of Thrones holder for my filament and some large tools, I made this holder to hold my tools in one spot on the front. This goes where the decorative nameplate sits on the Taz 5.
If you take off the decorative nameplate off the top of the Lulzbot printer, you can use the T nuts and screws for this.
This should work for all Lulzbot printers, or any others that have an extruded metal frame.
The 2d version has bigger slots for bigger wire cutters and a spot for your glue stick. You can print this with the MOARstruder to get a quick print in an hour, but I found at 0.3 layer height I get a smooth print.