This is my version of a digital camera adapter for telescopes. It was redesigned looking for simplicity and low cost.
Bolts are made with M6 thread. The sizes are:
22mm (for the ones that adjust height).
35mm (for the one that fixes the support to the lens)
35-40mm (for the one that holds the camera)
Nuts are M6 size.
I also used a 8mm rod from an old printer. You can use 8mm or 5/16' threaded rod.
Soporte telescopio_4 must be printed four times. You must glue the M6 rods onto them.