Simple Fan Holder for the Flex Wheel extruder
by Flex_Wheel, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a simple fan holder for the Flex Wheel Extruder, it can used with both the direct drive and bowden cable set ups.
It helps stop the heat travelling from the motor through the gearbox into the extruder mechanism.
Chose where you would like to mount the fan on the extruder and print appropriate file.
Additional hardware required.
To attach fan to bracket - 2 x M3 x 20 mm
To attach bracket to the Flex Wheel extruder - 1 x M3 x 35 mm & 1 x M3 x 20 mm.
More about the Flex Wheel Extruder
The flex wheel is a revolutionary new type of extruder mechanism which has completely moved away form the problematic hobbed gear pinch type roller system.
No more clogged hobbed gear, no more under extrusion problems, no more kinking of flexible filament, just more contact surface area transferring more power which drives your filament harder and faster, the Flex Wheel, designed for flex but prints everything the best.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this Thing
Simple Fan Holder for the Flex Wheel extruder by Flex_Wheel is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Flex_Wheel a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Flex_Wheel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).