This is a mount ONLY to be used on this X carriage designed by PrintingSome: https://www.thingiverse.com/thing:1001065
If you have the original D-Bot X carriage, use this mount: https://www.thingiverse.com/thing:2547179
Straight forward mount for a single Nimble and a V6. The Nimble bolts to the adapter. There are 2 positions, so the Nimble can be used left handed or right handed. The Clamp is used to clamp the V6 and the Nimble mounts on top of the V6 using the Groove mount adapter that comes with every Nimble standard. Really simple and easy to make adapter.
It leaves enough space for sensors and fan mounts.
Edit: The adapter is re-designed and rebuilt. There was an error in the clamp. This has been fixed. All the files have been checked and are OK.
For the clamp, use M3x20 mm bolts.
Edit 2: After some helpful suggestions from printingSome (https://www.thingiverse.com/make:388765) I have edited the main mount to incorporate his suggestions. The new file is uploaded and is called Nimble Mount D-Bot v2.stl
All CAD files have now been updated.
Edit 3: Added a new mount that has the rails to mount a BL Touch sensor. Also added the BL Touch mount.
Edit 4: Also added an induction sensor mount. For the M12 sensor.
The STL files are oriented in the best position to print them correctly. The other files are positioned in the normal (used) position, as seen on the image.
The Nimble Extruder
With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.
The Nimble is available from Zesty Technology.