Half Inch PVC Lightsaber Tip
by Okioter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I was making a Sith Dagger/Saber and didn't want a blunt end cap on the PVC blade, so I made this plug which should sit flush with the exterior diameter of the Half Inch pipe (Really Thin Pipe) Tolerance is a bit high so it is probably better to super glue or use PVC cement to permanently fix the blade tip to the pipe.
Maker Select V2
%50 - %100
Print at 190 Celsius, Set Speed (if applicable) to 0.7, and use heated bed.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Half Inch PVC Lightsaber Tip by Okioter is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Okioter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Okioter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).