Mouse Case @200%
by jmunford, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a case for my wireless. rechargeable mouse, made by uhuru. It's a cheap mouse (only around $17 on Amazon), but I like it. So, after breaking the last mouse, I made this case. Hopefully, I can keep it running while I'm packing it around in a backpack.
Hictop Prussa knock-off
15-30% for case body. 100% for top.
Print at 50%. Mouse_case_body should be 120mm long.
I printed with a brim and supports. It takes a little clean-up and graphite to work smoothly.
Insert mouse_case_top through the mouse_case_body slit from the inside out (so that the lip on the ...top is contained inside the ...body). This prevents the ...top from being pulled completely out.
Test function. Add graphite to sides of ...top and grooves on ...body
When satisfied, glue mouse_case_back onto ....body.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Mouse Case @200% by jmunford is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jmunford a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jmunford would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).