Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
by GunnarUK, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
lay flat as much as possible, I used a brim to hold it down but as you can see it did curl 1 side but didn't do it the second time so meh, green stuff to the rescue. This is a work in progress it may require scaling up a little bit. that's up to you. I have not got any side weapons to print so using some off other models. This is approx the size or a rhino transport vehicle so may not be accurately sized to anything else it may be a proxy for. hope you like, I have grown quite fond of mine.
only small amount of support needed on the chassis piece, most bits can be orientated to be flat or at a shallow angle to bed. brim adhesion and 20% infill.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Crawler tank by GunnarUK is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GunnarUK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GunnarUK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).