This printer is still in the experimental phase. Multi-Media Prusa may in the future be able to 3d print, create PCB boards or Frostrude.
Added updated Y Carriage and Y Endstop.
Added E3D_Mount, not tested yet. Wade Extruder mount will be updated soon.
Added E3D with Capacitive and/or Inductive mounts. Added X-carriage endstop sensor.
Moved BOM to each assembly video.
Added x Carriage Generic front for E3d and Paste extruders..
Paste/Chocolate/Pancake https://www.thingiverse.com/thing:2553286 This is still under development and will soon have a Z sensor added.
Removed x-Idler.stl and added two versions X_Idler_5mm.stl and X_Idler_3mm.stl.
Updated X and Y belt clasp.
Added Arduino RAMPS 1.4 board holder.
Added ZX Carriage Video
Added video(S) for wiring capacitive and inductive sensors.
Removed X_Axis_Endstop.stl and added EndStopV2.stl (can be used for any axis and remember to cover pins with non-conductive tape or use non-conductive bolt in 2020).
Added T8 Idler(Z_T8_Holder.stl) attachment, May remove M8 idler in the future.
Possible update in future, y axis end stop idler for y axis.
Removed X-Carriage attachment for E3D and added Updated E3D with side mount for either 40 mm fan or Inductive and Capacitive sensor(s).
Added RAMPS 1.4 tutorials
Added RAMPS 1.4 LCD tutorial. I'll be posting a final version of the printer in a couple of days.
Y_Motor_Mount.stl only requires rafts.
Z Axis Assembly Part 1
Wiring capacitive sensor.
wiring inductive sensor
RAMPS 1.4 Tutorial
Adding RAMPS 1.4 Endstop switches