This is the final version of the front parts of the 28mm ship
The pack for the rear of the ship is here :
Parts list :
- SE_front_gun (print 2x)
- SE_front_land_pad (print 1+ 1mirrored)
- SE_front_side (print 1 + 1 mirrored) (needs support only for the hinge)
- SE_front_turret (needs support)
- SE_canopy_final (needs support)
Most parts don't need supports, and should be printable as oriented.
Note : I'm sorry for the LARGE files, I'm not good at optimizing models : /
Assembly is easy, I placed some centering pins on most parts.
for the canopy, please look in the images, you will find the pattern for cutting the "glass" in some clear plastic sheet (for example some laminating pouches will do fine).
You will also need some 1mm metal wire (for example from a paper clip) for the front door hinge.
Check our Patreon for more awesome designs
Please share your makes :)
Have a nice print !
edit 23/04/2018 : remeshed some heavy files, and added mirrored parts with _sym suffix
== Please consider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.
Gray ESUN PLA
supports for some of the parts