Here is a printed Wrench - Clé (in French) to help to remove propeller blade from a Cobra 2205-2300kv motor (dimensions : 76,25mm length by 30mm width)
I made 3 different design because on the Yellow one, I broke a pin at the 6th test :
- Pin draft angle a 0° (yellow one)
- Pin draft angle at 5° (not printed)
- Pin draft angle at 10° (black one)
The prints were done on MiniKossel, I made a small time lapse video for the black version ( https://www.youtube.com/watch?v=AAeJ43-uu8Y )
Have fun !
The yellow version was printed at 60mm/s speed with 0.2mm by layer infill at 25% and temperature nozzle at 235°C (ABS) with buildtaked bed at 100°C.
The black version was printed at 40mm/s speed with 0.2mm by layer infill at 25% and temperature nozzle at 235°C (ABS) with buildtaked bed at 100°C.