Extended MakerGear M2 Spool Holder
by Neo_Usagi, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a modified version of the stock Makergear M2 spool holder. I really like the stock spool holder because its strong and holds the spool in place well. The only problem is that it is really short. So I made two versions. One that is long enough for narrow spools and one a bit longer for the thick squat spools. I did my best to maintain the overall geometry of the holder so it isn't just a stretched version of the spool holder but one where the center section was lengthened.
They should print fine in either ABS or PLA. No supports needed.
Print and enjoy.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Extended MakerGear M2 Spool Holder by Neo_Usagi is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Neo_Usagi a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Neo_Usagi would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).