An extension for the Nerf Deathtrooper Blaster to make it slightly more accurate.
Blaster will not fully function after this is attached as one of the dart barrels is partially covered.
I made two versions, one with a thicker alignment part as I can foresee it breaking under some circumstances. The difference is the inner diameter of the barrel is smaller on v2, which allows the wall to be thicker.
- e-11-d_nerf_barrel_extension.stl has a 0.8mm thick wall to align the part into the barrel of the nerf
- e-11-d_nerf_barrel_extension_2.stl has a 1.5mm thick wall to align the part into the barrel of the nerf
Credit where credit is due
I created this to help with a mod after watching this video:
Thanks to JODOCAST for the inspiration.
You can pretty much print this however you like.
I suggest printing with the open end of the barrel facing up, and using supports. This way the underside of the supports is hidden when the part is joined to the blaster.