This is my model made from screenshots and artworks of Twin Blade Knife from Dishonored: Death of the Outsider.
To put the model together you'll need 10mm x 2mm x 80mm (or close to it) ice cream sticks. Some pieces must be glued together (Handle 5 and Handle 4) but i recommend to use glue on all parts anyway for strong connections :)
Model has 2 mm diameter holes in the Blade 1 part, you can either use 1.75mm flexable fillament or go crazy with real wire like you can see on the original artwork attached in images.
I also added single stl if you want to cut the model yourself :)
-Finally added some photos of my print!
Parts that need supports: