This is a storage box for Warhammer 40K Conquest LCG by Fantasy Flight Games. It can be made using a CNC or Laser Cutter.
I made this using a Mostly Printed CNC (MPCNC). The walls are made from 1/4 inch MDF and the dividers are made from 3mm hardboard. Ideally, the dividers would also be made from 3mm MDF but I could not find any at my local stores. I used wood glue and some clamps to lightly hold the corners in place while it dried.
This box is currently holding everything ever made for the Conquest LCG with some room in the top to slide rulebooks in. In the photos, I have a little over half of the cards sleeved in Fantasy Flight sleeves and believe everything should fit once everything is sleeved.
Note that this box is HEAVY once all the cards are in it.