Tevo Little Monster 16" Glass Table Bracket

by bLITzJoN Oct 2, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Since the glass bed is bigger then the original, are there any hardware/software limitations to prevent you from printing at the new 16 inch size? (apart from the heated area being smaller for warping prints)

Nope. The TLM will reach outside its original print area but that doesn't mean the firmware will allow it; however, if you are capable then you'll have more room over the stock build plate to reach that much further out between the towers. :-)

Where did you get the glass? Did you source it locally or online?

I purchased it from https://glasstopsdirect.com/glass-round-16.php (link is also in the Thing Details).

hey ,
My Autoleveling did not work with the glass ,should i change anything in the options?

thanks for the file ;)

Determine the thickness of the glass and update your gamma_max value in the config with the difference (gamma_max - glass thickness = new gamma_max).

You may have to delete your config_override file, or edit it to remove everything aside from the pid tuning lines (can't remember what they are at this time)

how did you integrate the heating element? did you just peel it off the old glass and stick it on the new?

I didn't replace my glass. I merely affixed it on top of the existing glass.

Oh I see, thanks. It printed wonderfully by the way! I'll upload a made once the glass comes in

Dude, you REALLY wanted that removable glass bed! ...props!