by BitsnBolts, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Low-poly version of the Cute Dragonling mascot modeled in Tinkercad to promote their new Bricks Workspace. Low-poly mods done in MeshMixer.
Copy and modify the low-poly version online via Tinkercad https://www.tinkercad.com/things/eS5cEGywc3l-low-poly-dragonling
Check out more project starters at my profile in Tinkercad https://www.tinkercad.com/users/6ZyoPpYZi88-bitsnbolts
Copy and modify the original Dragonling model via Tinkercad-
Any, but Standard or higher work best
You might consider adding an extra shell or 2. The wings aren't necessarily fragile, but they seem to be the weakest point if you don't get good layer adhesion.
Considering making the wing webbing stretch down onto the body to make this area stronger.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Dragonling Low-Poly by BitsnBolts is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving BitsnBolts a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure BitsnBolts would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).