A grip for the ARAX 60 / Kiev 60 camera.
The original metal bottom plate from the camera needs to be exchanged with the grip. The bottom plate of the grip is secured with the 4 screws of the original bottom plate. I recommend to use also carefully some glue (like Pattex or Super X).
The upper part of the grip is secured through the camera strap lug. The printed plastic pice inside the grip need to be adjusted until it fits perfectly into the strap lug.
The grip surface can be enhanced through a thin leatherette cover.
The print size might be slightly to small. I suggest to print first only the bottom plate and increase the total print size percentage until it fits perfectly.