I wanted a small monitor for setting up Raspberry Pis, and bare 10-inch panels can be had for ~$50, so I designed a case and stand for it in OpenSCAD.
Full instructions here: https://github.com/rejamison/mini-monitor
- The bezel part was too large to fit on my print bed, so I cut the part in 2 (
mini_monitor_bezel_right.stl) and glued them together. I recommend printing the bezel in one piece (
mini_monitor_bezel.stl) if you can.
- Printed using Polymaker Polymax PLA
- I initially printed in regular PLA, but had some issues with thin parts snapping off. I recommend a PLA formulated to have a bit more strength like the Polymaker Polymax PLA, or ABS.