I designed this version of the Makey Robot with interchangeable pieces, along with some other fun features to allow you to personalize this little guy and bring him to life.
Feel free to message me if you have any questions. Enjoy!!!!
I printed at 80% because I like the weight and strength of a solid piece, but you can print at 30- 50%
Materials Used: PLA by COEX3D
Colors: Neon Green, True Black, and Glow In The Dark (Green) for Chest Plate.
- Print Chest Plate & M as a Multi-Color Print
- Print (2) Shoulder Spacers
2x - 3mm Super Bright LED's
1x - 5mm Slow Color Changing LED
1x - Micro Switch
28 AWG Silicone Wire (Black and Red)
3x - 3202 Coin Batteries
LOCTITE 60sec universal glue (For gluing Back/ Front Shoulders and Spacer together.)
2x - M3 x 8 Hex Screw (Head)
2x - M3 x 22 Hex Screw (Shoulders)
2x - M3 x 22 Hex Screw (Mid Arms)
2x - M3 x 14 Hex Screw (Hands)
2x - M3 x 18 Hex Screw (Upper Legs)
2x - M3 x 16 Hex Screw (Mid Legs)
2x - M3 x 22 Hex Screw (Feet)
P400 X-Fine Sand Paper for wet sanding (Optional).