A Tongue Scraper - Use Your Maker To Cure Bad Breath
by CalmTom, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Do you have bad breath? Are you sure? If you think you might, why not cure your bad breath with this tongue scraper. In less than an hour you can print it out and then scrape away all of the nasty bacteria that is living on your tongue. Your friends and family will thank you for it.
This tongue scraper is an .stl file that should be ready to go. It is small so it prints quite quickly.
When it is done you can use it to scrape all of the nasty gunk off of the surface of your tongue. Similar tongue scrapers sell on ShopInprivate.com for about $7. This means that if you print 300 of them you can just about pay for the purchase of a makerbot replicator. Woo!
In case you are wondering why I would create something so strange and personal, I have a project going on where I am designing items that are embarrassing to buy in the store. I figure if you have a Maker you could just make these items at home. I call the project MakerLove.com and you can visit the website if you think it sounds like a good idea.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
A Tongue Scraper - Use Your Maker To Cure Bad Breath by CalmTom is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving CalmTom a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CalmTom would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).