These prints, allow you to add extra rods to the printrbot making it more stable.
Wobble is the biggest issue I had to face, so adding two rods to the Y bed and two extra rods in the Z axis has helped significantly in reducing wobble, to almost none.
These parts replace
- The original printrbot Z bases
- The X idler and motor carriage
- Adds an extra Y axis base with dual rods.
You will need:
- Two identical Z axis rods
- Two Identical Y axis rods
- 8 Linear bearings
- M3 x 32mm screws x4
- M3 nuts x 4