This is a cap designed to fit over the XT60 connector. I usually keep all my Lipo batteries together in a box and it has always been in the back of my head that one fateful day two batteries will short themselves together. Hence, a simple cap.
I've also attached a pattern of 2 and pattern of 6 for those who want to print multiple parts.
Printed on the Replicator with the following settings
Number of Shells: 1
layer Height: .2mm
feedrate: 60 mm/s
traverse rate: 100 mm/s
extruder temp: 230C
Print Time was approximately 17-20 Min.
Made with Autodesk Inventor 2012