"I want to use the boring stand that my Yi Home camera came with...." - me
"I'm sorry Dave, I'm afraid I can't let you do that." - camera
This is a nifty wall mount that replaces the stock camera mount for the popular Yi Home camera and possibly the HD and Nest.
Link to Camera: https://goo.gl/KftwjR
It prints as 3 pieces: a gray speaker grill, a gray frame, and a black insert with the camera mount. The tolerances are pretty close so expect some very light sanding to pop in the pieces correct. It comes with a screw mount at the top and requires no glue or screws to assemble. It's designed to print on a 200mm printer.
Speaker: I left the speaker grill as a separate piece so you can paint it if you want it slightly off color. Because of the high level of detail, it's quite a test for a printer, but the imperfections work in its favor
Black Insert: The insert is 4mm in height. To get the gray trim around the logo and camera, pause and do a filament change at 4.1mm+ or configure your slicer to pause the print. Of course you can always just paint it, but I think this looks better.
Stickers: I included 2 stickers that you can print and stick on with a gluestick.
Ignore the version numbers in the filenames. Those are my revisions where I was testing with nubs and other clips to snap the pieces in place.
Black insert requires a filament change @ 4.2mm for best results.
I found the pieces a tad too tight straight off the printer. Some very little sanding on the sides of the black insert and speaker made everything pop into place swimmingly!