My Solar scope has an odd space between the holes for the dovetail mounting. I drilled my bar to fit but the dill bit slipped and the hole was slightly off. my alinement was never right. So I made one to fit my solar scope.
This model is easy to tweak. So if you want to print one, just message me with where you want your holes and how long you want it. I'll gladly adjust the model to your specs. I have also added a hole for installing a 3/8-1/4 thread adapter so it can be mounted to a tripod.
This is something you want to print out of abs and make it as solid as possible. I was skeptical myself about this as my solar scope is about $3000. But it seems to hold rater well.
BUILD & USE AT YOUR OWN RISK. I am not responsible for any damage to personal property that may happen while using this model.
Please Respect the CC Licence. These are not to be built and sold for personal gain. Greed is humanities greatest weakness.
Message me for your personal hole positions and length @ firstname.lastname@example.org
Originally modelled from the standard Vixen style dovetail bar.
3/8-1/4 adapters can be found on amazon
use a 3/8 tap to pre-tap the hole for the insert.
Insert hole tapped
thread insert into hole and enjoy