Seej Cryptstone Bloxen, Oubliette
by zheng3, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
"When you are wise, appear foolish."
--Qie Zi, The Art of Seej
There's a password to a secret Seej model hidden inside the data for the Cryptstone Oubliette Bloxen. The secret model isn't available on Thingiverse, and only those who break the code can find it.
The doors to The Crypt stand covered in dust at http://crypt.s33j.net. Models lie beyond each of the doors.
Stuck? Need a hint? Follow http://twitter.com/Zheng3_Jim and send me a direct message.
Good luck with Cryptstone Challenge Secundus.
Construction is snap-together!
Print one each of the base, plate, and ring, or just one copy of bloxen_oubliette_full.stl. The .zip file contains all the pieces you need.
bloxen_oubliette_stego.stl will probably print, but no promises. That's the model in which you should look for the secret code.
If your oft-churning cortex remains unfazed by this paltry hurdle, you can always try the Original Cryptstone Challenge: http://www.thingiverse.com/thing:24741
-=-=-] CopyPasta Seej Verbiage [-=-=-
Seej is an Open Source tabletop wargame based around 3D printing. Check out http://s33j.net for rules and more information.
At a minimum, you'll need the Seej starter set: http://www.thingiverse.com/thing:24013
Lots of players lurves them some ballista, too: http://www.thingiverse.com/thing:23464
You can also search Thingiverse for Things with the seej tag.
Upgrade this Thing with Thingiverse AppsTools and Utilities
Repair, slice, or enhance this Thing
Seej Cryptstone Bloxen, Oubliette by zheng3 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving zheng3 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure zheng3 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).