I designed this to hold the 12864 lcd screen for my tronxy X5S as I didn't like the screen on the bottom corner like it was. I have not printed it yet as other prints where in line first. this should mount to the 2022 rail or can be mounted to about anywhere you want with a couple of screws...
To install this should require the 4 factory m2 bolts then 2 10-12mm m2 bolts and nuts for one of the mounts on the back piece and 2 m4 bolts and tnuts (these should also be able to be the ones from the factory ldc mount) second single hole mount option can be used so bolt count might change. I also used 5 m5 30mm bolts and nuts for the arm...
UPDATE 10/29/17: I printed the new back but ran out of filament most of the way through the print so I can't see exact fitment as far as depth and full enclosed case... but all the mount bolts are perfect... nothing needed there I did end up moving the opening for the cables over 1 mm to the right as it was not perfectly centered. I'm sure I can call this one good now... please download the updated files and print away...LOL I did add a second file for the front the SH has a smaller hole for the knob didn't go to small as I honestly just didn't feel like making it perfect when the knob would hide it... therefor I would recommend printing that one... I also added a single hole version of the mount for frame side option.
Update 19/27/17: I checked the files from yesterday and the top two mounting holes where 2mm to high still files from today are correct.
Update 10/26/17 fixed all the measurement issues and decided to make the bolt holds through the mount bracket 5mm instead of 8mm
Update 10/26/17... it should all be correct now but I still have not printed it yet but should be here tonight.
UPDATE: just got a comment that this is way Off I will check it and update later tonight. The comment states that the screen opening was way to long and my screen opening from the factory is 81mm x 52mm and the opening in my design is 81mm x 53mm so thats pretty close. yet the knob was off by 2mm.. And my mounting holes are way off... I will fix this and have the new files uploaded tonight.