Are you scrolling through Thingiverse searching for a Creality CR-10 upgrade? Well, look no further! This is the most ultimate upgrade ever! The benefits to this upgrade are:
-Ease of use
-No more sore thumbs (more leverage on arm)
-Print flexible filaments like a breeze
-No more tangled filament
-PTFE guide tube
-No additional hardware
I believe this is one of my best designs so please share and post makes!
If you enjoy my designs, I would appreciate any tips to support me and my growth as an engineer. https://www.thingiverse.com/Coolcrawler_/about
Post Processing: Once you are done printing, clean both the base and arm. Print at highest resolution as possible.
Base: Make sure all holes are clean and free from supports; drill if needed. Cut a piece of PTFE tube (included with printer) to about 10mm. Cut a V shape. This should fit perfectly between the feeder gear and the bearing; there should be no friction.
Arm: Clean the supports under the spring holder. Make sure there is no excess plastic, drill if needed. Cut PTFE tube to any length, this can be connected to a filament enclosure directly, like this one: https://www.thingiverse.com/thing:1332650