after Chad Kapper released the Rotor Riot logo, i got to design what i always wanted to, RR landing skids. i will say that ABS looks better but TPU performs better, it just wont look as good as you'd hope, unless your rig is great at TPU printing.
V1 has a 1mm base bottom (this is used in the group file)
V2 has a 2mm base bottom
V3 has a 1.5mm base bottom
infill 100% for most durable results.
if you're choosing to print in TPU, best print i achieved was at 15mm/s. i suggest starting at 20, and slowing down to increase quality.