Customizable minimalist bit holder

by crashdebug Nov 2, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Unfortunately for me the print was a bit loose. Perhaps scaling it to 95-98% would be better if someone else tries it. Thank you for the design.

Thanks for the feedback. The size can also be modified when you open it in customizer. The default "Slot Size" is 6.5 mm but can be set freely to adjust to your printer/bits for optimum fit.

Thank you for the reply. I would have liked to see more feedback from other people attempting this to see if this is isolated to my bits (not all bits are equally made). I've measured mine to be exactly 6.5, so, for an interference fit, probably at least 0.5mm would do the trick. Did it work well for you?

My print was a good fit, but the low print quality (0.5 nozzle, 0.3 layer height) tends to make openings slightly smaller. Also the white print in the picture slightly arches upwards with all the bits inserted, if bent any further the center bits tend to fall out.
This is why I later added the option to generate front/back "walls" for more stiffness (mentioned in the description).