Customizable Sierpinski tetrix
by owens, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Continuing the theme of fractals that print with their own support structures, this is a model of the Sierpinski tetrix, a fractal based on the tetrahedron. It's a difficult object for a fused-filament printer because it involves lots of bridges, and the individual tetrahedra are only lightly connected to each other.
To make this model I started with cgranade's OpenSCAD Recursive Sierpinski Tetrahedron, which includes a clever adaptation for 3D printing, a parameter that adjusts the adhesion between adjacent tetrahedra. It makes the tetrix less like the mathematical ideal, but a perfect model isn't printable anyway.
I added external support that lets the model print upside-down, which solves the bridging problem. See the instructions for how to customize it and suggestions on how to get a good print.
The Customizer parameters are as follows:
Order - the level of recursion of the fractal. Zero is a solid tetrahedron, and the script will work up to 6, but I've limited it to 4 in Customizer to reduce the load on the servers because I don't think anything beyond that level is likely to be printable.
Size - the length of a side of the tetrix, but note that the size varies a little with different levels of recursion, and will need adjustment if you want exact results.
Adhesion - the adjustment (from cgranade's original code) that allows a connection between adjacent tetrahedra. I've found 0.25 to be a reasonable starting value, you can try setting it lower (less adhesion, but a more ideal fractal).
- Intersection - the amount that the support structure overlaps with the tetrix. This is not in millimeters because it's applied before the scaling. At a size of 80 mm, 0.005 produces a solid structure that isn't too hard to remove.
I'd suggest starting with the defaults. Smaller prints may be possible but I've found that my printer inevitably knocks some of the small tetrahedra loose, and the print is ruined.
It's likely that the OpenSCAD output will need to be repaired before it can be sliced. For the example STL file, I used Netfabb Cloud.
I've had success with these parameters, and with the following settings in Slic3r:
0.30 mm layers
3 top and bottom layers
avoid crossing perimeters
0 solid layers
0 mm solid infill threshold area
This keeps the printer from spending too much time on each small tetrahedron, and seems to make the whole model more stable. The resulting print has 14 g of plastic in the finished tetrix and 21 g in the supports, but they're already quite minimal and I'm not sure how to make them smaller and still have them work.
To remove the supports it's best to hold the model gently but firmly and slowly rock the support back and forth, only bending it just a very small amount until the plastic begins to break loose. Other than that the model should need no cleanup.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Customizable Sierpinski tetrix by owens is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving owens a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure owens would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).