Update: Turns out, these are actually a smidgen too long. If you put 2 of them on top of a 40 footer, it hangs over. So, in your slicer, reduce the length of the side walls, roof and floor by 3mm, and your good to go. :)
Your support can help me to create and release new designs.
Become a Patron!
This is, in my opinion, a better 20ft shipping container. Why better? 1. The dimensions are correct to scale (not all the current offerings are) 2. It has the correct number of ribs 3. It has forklift lifting points (i've not seen a 3d printed one yet that does) 4. The details are clearer.
In order to achieve good detail, I designed the container in parts, so assembly is required. Also uploaded a 40ft, 45ft and 53ft version.
I recommend assembling in the following order:
- Glue 1 side to the doors, aligning the hinges.
- glue the floor, aligning the bottom of the floor with the top of the forklift lifting holes
- Glue the roof in place, with the top edge of the ribs flush with the side
- Glue the end wall in place
- Finally glue 2nd side.