When I designed this body some time ago, I wanted to use as less PLA as possible. That is why I just designed the "skin" of the body and then I used 5mm plywood in order to make the body stronger. So the entire design is prepared to use 5mm plywood as you can see in the photos. You will have to glue all the parts and I highly recommend using mounting putty because it makes easier to assemble
The cab is fixed to the frame with the "chassis joints" and 4 M3x20mm screws.
You will also need to make one hole in each "wing" part in order to screw the chassis joints. (Design mistake that I have to solve)
Feel free to remix the cab in order to make it 100% printable or whatever you want.
Here you will only find the cab files. In order to build the entire Pegaso 1080 you will also need this other parts:
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.