Light Arm 140!
This is a lamp that I designed for my desk that takes after the ThingPro (GoPro) 3-Way that I also designed.
You can find it here: https://www.thingiverse.com/thing:2604562
I took a lot of inspiration from other great Thing's here on the site which you can find in the Remix Source Files. Credit goes out to them!
This is a 140mm version of the Lamp and I will likely release a longer version in the near future.
I used Simplify 3D to slice all of these models prior to printing.
Some additional details:
I used support in all obvious places, as well as all of the bolt holes. That said, it takes some care in settling up these models for printing. Simplify3D does a great job dealing with support material and I would highly recommend it if you don't use it already.
- I printed all of these parts with 3 perimeter shells (1.2mm @ 0.4 nozzle) to increase the strength.
11/6/2017 - Initial Release