The default mounting bracket houses a 10 mm (at the hub, 22 mm at the flange) trapezoidal nut, the POM anti-backlash nut I received is considerable larger (20 mm at the hub, flange is about 36.5 mm), therefore I have redrawn the original mount to house this larger nut and kept the same center of the original nut. Note this nut only has 2 holes to fasten the nut.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.