Nema 17 Holder for 30x30
by schmitty_creat, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a holder for the stepper motor Nema 17, any size. You can screw on the Bosch profile 30x30 ore 30x60.
-3d Printer :)
-4x aluprofile 30 Nut 8 M6
-4x M6x10 or 11 screw
For the mounting:
Don`t scare when you see thet the Nut dosent get into the Nut into the profile.
First you screw a M6 on a corner and fix it ( You can see the process at the image 10 to the end of the picture). After you shake the part a littel bit and than you screw the M6, a cross, on. Than you shake it so long that the part fits into (When it dosent get into you screw up harder).
Then you can screw the other two M6 on.
Only after the mounting on the profile you srew the Nema 17 on the holder!!!!!!
Hopefully someone can use this part.
How I Designed This
If made this with FreeCAD.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nema 17 Holder for 30x30 by schmitty_creat is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving schmitty_creat a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure schmitty_creat would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).