Squashball Feet for Creality CR-10

by kaktus2 Nov 15, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I want to modify this for the Railcore printer. All it will require is making the plate bigger in one dimension so it's square, and moving the holes a little. What would I be obligated to do, if anything, to get permission to make this available to other Railcore users?

hi can you say what for screws you take to fix on the printer? thank you very much


ich habe mal einen Spacer gebastelt. Brachte etwas mehr höhe da ich was unter den Drucker bauen möchte.

Hab das File mal an gehangen.

Hi, würdest du ggf. die Datei als .step oder CAD Datei zur Verfügung stellen zum weiteren anpassen?

Besten Dank und Gruß

Les balles de squash s'insèrent parfaitement, parfait

Fantastic idea. Sadly, my print broke directly between the base and the holder, with 30% infill there was almost no connection. Will retry it with 100% infill..

Yes, ist musst be 100% infill

I've printed it successfully with only 30% infill, I really don't see a reason for 100% infill on anything, except probably lithophanes.

Just tried again and watched while printing. I also can see the problem at the slicer preview: within the plate is left a "pit". As soon as the height from the plate is reached, it starts to print the squashballholder above this pit, i.e. there´s a hole where the two "parts" should be connected. I use Simplify 3D V4.

Hole: https://picload.org/view/ddgglwil/squashholder.jpg.html

next layer: https://picload.org/view/ddgglwii/squashholder2.jpg.html