You are a bavarian Hans or Gretel, living far away from your sweet home and have Heimweh for our famous bavarian Gemuetlichkeit?
Then this might just be the product for you!
This traditional bavarian tablet for rolling traditional bavarian cigarettes is/can/will-be made of 100% pure ABS, with a dimension of 147x95x39mm, weighting in at about 65-75g (depending on line thickness and fill pattern).
It is compatible with all major brands of longpapers, rolls, and filtertips including the slim and wide variants of OCB and RAW.
The integrated grinder holder can be used with all grinders of up to 21mm in thickness and 21mm radius.
You don't own a grinder? No problem, you've just got yourself a nice mixing bowl (Mischeschale)! ;-)
The three filter tipp holes are 9, 7 and 5mm in diameter and may also be used as stands for traditional bavarian cigarettes or small pipes, e.g. the infamous SPP1 Titan pipe.
It is based on 42lines of openscad code and takes about 4:20 hours to print on a repman 3.0 with 0.5mm thickness and 5% honeycomb filling.
Best results are obtained with 0.125mm thickness and 30% honeycomb filling, although that literally takes all day and requires a tiny bit more material.
Make sure your printer can handle 147x95mm without raft.