by Gythral, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A cylinder type battery box, with cutouts (front, rear & between cells), can be customized for the number of cells (2+) and the cell type, as long as the cell is taller than its diameter, there are pre-sets for common battery types
If you only want a 1 cell holder or cases without the internal cutout :- https://www.thingiverse.com/thing:2645080
CTC Prusa I3 clone
It should be all perimeter, so the infill setting is redundant
May need a bit of cleaning up, dependent on how well your printer does the bridges
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Battery Case by Gythral is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Gythral a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Gythral would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).