2.5 in to 3.5 in HDD Adapter
by toybuilder, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Many SSD drives and HDD's from notebooks are 2.5" form-factor drives. Most desktop machines are designed for 3.5" form-factor drives.
Use this bracket to adapt the 2.5" drive for use in a 3.5" drive space.
This is designed so that a UNC 6-32 screw can tap into the plastic of the 3.5" drive mounting holes.
2.5" drives use M3 screws - the holes for them on this bracket is designed for 3 mm diameter.
Drive mounting hole details were extracted from http://datasheet.octopart.com/FFD-25-IDEP-2048-N-A-M-Systems-datasheet-4668.pdf
Original design file for Alibre Design 2012 is included (AD_PRT).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
2.5 in to 3.5 in HDD Adapter by toybuilder is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving toybuilder a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure toybuilder would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).