Makerbot Replicator 2x cable holder Upgrade
by dinkel5110, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The part was designed by me because the Replicator 2x often has problems with cable breakage at the transition from daual extruders to the wiring harness.
This upgrade enables the cable harness to be fixed over a longer distance with 3 cable ties.
If the mount is printed with only a small amount of infill (15%), there is still a very slight flexibility.
With the extension of the cable holder I had so far no problem with cable breaks or wear of the cable insulation.
Have fun! ;-)
The less the holder should move, the higher the infill must be.
I have had good experiences with 15%.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Makerbot Replicator 2x cable holder Upgrade by dinkel5110 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving dinkel5110 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dinkel5110 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).