For mounting FSR to a 240mm lateral beam of the Mini Kossel.
(Not for Mini's with the power brick mounted in the base.)
You need 3x each, fsr-mnt.stl ,fsr-clip.stl.
Fits to 6-1/2 dia. x 1/4 thk. Borosilicate bed purchased from McMaster.com.
Neoprene Rubber (not foam) Disks 10mm dia. x 1.89 thk.
Based on feedback I've added v2 files.
fsr-mnt-v2.stl has deeper counter-bores for shorter screws.
fsr-clip-v2.stl has slotted holes to allow a greater range of adjustment.
Inspired by Johann's excellent work.
So far I've discovered there needs to be some amount of point loading between the glass and the FSR. Just trying to squeeze it between flat glass and flat PLA, doesn't produce much of a sense.
Update, Tried cork disks ~10mm dia.
Update, replaced cork with Neoprene Rubber (not foam). This seems to have the proper flexibility and lack of compression.