This is a light diffuser for the Neopixel 24-led ring
I used clear PLA but white should work well too. You can play with the infill for a more or less diffused light.
There is a "thick" version with wider walls for a more diffused light.
It also makes a cool coaster!
Thick version took 2h00 to print with:
- 0.2mm layers
- 0.8 mm shell thickness
- 1.2 mm top/bottom
- 25 mm/s print speed
The version with thicker walls (4 mm outside, 6 mm inside)
The version with thin walls (2 mm)
The notch on the side is for the wiring
Used as a coaster