low profile 9v battery sleeve
by agwn, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
needed to mount some 9v batteries to power some wearables so I made a minimal enclosure.
Have not tried with cool enabled. Printed on my T-o-M 4 up to let things cool enough between layers. Found slicing settings that result just print just shells for the walls after the base layers are done. Worked well and printed fast. Velcro the flat side onto clothing for wearables or glue to a flat surface.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
low profile 9v battery sleeve by agwn is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving agwn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure agwn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).