These designs are for Public Labs Spectrometer 3.0 , I just wanted to design a few upgrades and try to help make the machine better and the community behind it.
Prism.Cameramount and cuvetteholder will both need support printed with them
Magnet sized used was 3mm x 9.5mm
Cuvetteholder will need a 2 small thin slivers of steel attached to the side that goes against the spectrometer , this way it can attach to the magnets. ( photo provided)
My designs might not be the exact size so a small amount of sanding might be needed.
I had to put Printerbot plus but I actually printed this on a printerbot LC, pretty old printer but works great.
The 100% infill probably isnt needed but I have always printed 100%