Presentation Box for Gift Card Vault
by visigoth, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This gift box was designed to fit the Gift Card Vault (http://www.thingiverse.com/thing:263574), to provide yet another personalization opportunity when giving the very un-personal (but very convenient) gift of a Gift Card.
The box was inspired by feddasaur's "Gift Card Box" (http://www.thingiverse.com/thing:209112) but was designed from the ground up in TinkerCad to accommodate the larger Gift Card Vault. (Except for the Bow, which was taken directly from thing:209112, since it looked so great.)
Lids for 'Happy Birthday' and 'Merry Christmas' are provided, as is a blank lid for your own customization.
Box and lid were printed together in one color. The ribbon and bow were printed separately in a second color and attached to the lid using superglue.
Print the lid with the top surface facing the build plate.
Since the lid is printed with the top facing down, going with cut-outs for the words works better than raised lettering.
STL file for one Card Vault (with question marks) is provided here, but for other Card Vaults see http://www.thingiverse.com/thing:263574.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Presentation Box for Gift Card Vault by visigoth is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving visigoth a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure visigoth would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).