Anet A8 E3D V6 mount and carriage

by madizmo Nov 25, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Someone had made BLTouch mount but i found it bit too weak and made better: https://www.thingiverse.com/thing:3046201.

Bl touch mount for anet a8 "madizmo" e3d v6
by Henri1
Comments deleted.

please send me gcode for 3d printer x-axis motor carriage

Great model! Printed it in PLA and everything works fine.

Printed all the parts (mostly in ABS) a few days ago, nearly done assembling it - great design. But the original material cooling fan from the A8 doesn't fit on the mount at all. I sourced some new fans but now I'm wondering if they will fit -- is there any particular style I should be looking for?

Hey mate, great design! I'm getting ready to start printing the entire setup. Quick question, You have two cooling fans setup. How did you wire that up to the motherboard?

I just spliced both fans in to the one wire coming from the board. I had two brand new fans I used so I cut the wire on the original fan and sliced that to the two new ones. On down side with running the dual fans is you can only run them at 100% or 0%. Not sure if it's the fans I bought not being capable or just having two fans wired in parallel off the board.

It works for me. Maybe the problem are your fans. @madizmo

Hi, can I print this carriage/mount in PLA? Another cuestion, can I add this mount (https://www.thingiverse.com/thing:2219963) for my inductive autolevel on this carriage/mount)? Thanks for the awesome design :D

ANET A8 | V2 Rear Bed Level Sensor Holder - Customizable
by TNS

Yup I printed mine in pla and have had no issues at all. That sensor mount should work just fine with it.

Could you include holder for stock anet A8 sensor - tronxy? Blue,square one.

Thanks once again!
Also didn't found 40mm clamp.

Sorry i totally forgot to upload the adapter. It's there now.

Nice! hows it working for you?

Didn't you had to change the offset of the table ?
Are you thinking on put a bltouch in there .?
Great job

Do you have the same setting as original extruder? you have to change the MARLIN settings ?

Yes. i had to tinker with retracion settings a little but thats all


Pretty good so far!

There're some models missing in this package, such as belt holder and one cool-looking fan guard :D
Maybe you can add some links?

Sorry totally forgot to add them last night, I will right now.

Ive also added some braces for the blower motors

Thanks mate! You're the man and made my day. Printing it right now — I think it's finally the right time to switch from my mk8.