Stone resource tiles for my 3D Settlers of Catan game board. Concept is based on the Catan tiles done by RecklessRobbie.
I made these a bit thicker for increased stiffness and durability (I'm using PLA for material, settings are below). I also made the tile-to-tile interface a bit tighter tolerance to ensure the tiles stay together nicely. And finally, I added recessed areas for the player pieces around the outside. The recessed pockets are sized for roads with a footprint of 6.5mm x 27mm and town/city pieces that are ~15.3mm diameter. I am making my own roads, and plan on using the town/city parts designed by Thuren.
My print settings were 0.15mm layer, 2 perimeter, 3 layers top/bottom, 15-20% grid infill, 2mm brim (helps keep the tile-to-tile interface tabs from warping).
For the rest of my designs, see the following links.
Brick Tiles - https://www.thingiverse.com/thing:2665998
Sheep Tiles - https://www.thingiverse.com/thing:2671020
Stone Tiles - https://www.thingiverse.com/thing:2671047
Wheat Tiles - https://www.thingiverse.com/thing:2671053
Lumber Tiles - https://www.thingiverse.com/thing:2671060
Desert Tiles - https://www.thingiverse.com/thing:2671091
Border Tiles - https://www.thingiverse.com/thing:2671149
This project is still a work in progress, so stay tuned for additional parts, like the roads and harbors, and tiles for expansions like Seafarers. And please leave any comments, suggestions, feedback, etc. in the comments.