Modular for 19mm Tubing
i needed some additional storage space so knocked up these quick parts to create a modular filament rack using easily available 19mm tubing from most hardware shops.
I bought 4 x 1800mm long 19mm diameter tubes at £8 a length from a well known UK DIY shop.
Requires M5x30mm Nuts and Bolts for the Joints.
Just as a thought the 19mm diameter tubing i bought ranged in diameter from 18.94 to 19.12mm, the part hole sizes are 19.2mm, on the machine i printed these with petg i get 0.1 shrinkage and so i wanted a neat fit. It would be best to check your tubing diameter before printing.
Printed using Real Filament PETG in Black from amazon.
Print Temp : 240°C
Bed Temp : 80°C
Print Speed : 70mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 30%
Shouldn't be much to do other than remove some support material and clean out the holes with 4mm drill bit.