Loading
stunner2211

Hummer H1

by stunner2211 Dec 3, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Model came out microscopic in size when loaded in Cura. I scaled it to 500% just to get it slightly bigger than a matchbox car. The print quality turned out bad after taking approx 6 hrs on just the body using quality settings of speed= 30 mm, layer= .08, support ALL at 15%, infill at 15%.
What do I need to do to get a quality print of body and wheels separate ? What orientation for parts should be used, support type and density as well as layer thicknes and speed? I wish someone else could figure out what’s wrong, see photos. Thanks

According to your pictures you have some problems with your printer. Did you calibrate your printer correctly? Also your Printer have some issues with vibrations. Maybe something is not fixed on your Frame or your acceleration is too high.
Here is a good Troubleshooting Guide: https://www.simplify3d.com/support/print-quality-troubleshooting/

The detail is excellent! Thanks!

Do you mind posting the PRT file? I am having a hard time converting the STL to a mesh that I can edit and put bearings in for the wheels.

Thanks!

Hey, i dont have .prt files for it.

Thanks Stunner2211 :)

All Alfisti waiting a Guilia from you...